METHOD OF STATEMENT FOR EXHAUST FANS

METHOD OF STATEMENT FOR EXHAUST FANS

1. Scope of WorkTable of contents

2. Purpose

3. Abbreviations

4. References

4.1 International Codes

4.2 Project Specification

4.3 Client Standards

5. Responsibilities

5.1 Project Manager

5.2 Site Engineer

5.3 QC Supervisor

5.4 The QC Inspector

5.5 The Safety Engineer/Inspector

5.6 The Site Supervisor/Foreman

6. Safety

7. Procedures

 

1. Scope of work

The scope of this method statement is to define all activities and requirements necessary for

Exhaust fans, Heating, Ventilation and Air Conditioning (HVAC) System at ‘

and to ensure that all works/activities are in full compliance

with project specifications, drawings and Client standards related to installations standards,

verifying Documents comply with Client Typical Inspection Plan (SATIP) related to

installations.

2. Purpose

The purpose of this method statement is to describe the quality control procedure to be followed

During installation of Exhaust fans at Expand Dhahran Residential Community project at Dhahran,

KSA and to detail the instructions to be followed and the documentation to be employed in order

to ensure that safe installation is executed in accordance with the project specifications and

standards.

3. Abbreviations

MS : Method Statement

IC : Client Inspection Checklist

TR : Client Test Report

TIP : Client Typical Inspection Plan

ES : Client Engineering Standards

RFI : Request for Inspection

PID : Project Inspection Department

PMT : Client Project Management Team

ITP : Inspection & Test Plan

 

NCR : Non Conformance Report

MAIN CONTRACTORS : Main contractors

PM : Project Manager

CM : Construction Manager

PPE : Personal Protective Equipment

QA/QC : Quality Assurance/Quality Control

4. References

4.1 International Codes

· Test Code for Air Moving Devices

· Underwriters’ Laboratories Standard for Safety for Electric Fans

· Test Code for Fans

· Standards Handbook

· Standard Test Code for Sound Rating

· Fans, Standard Classification for Spark Resistant Construction

 

 

4.2 Project Specification

§ 40005 - EXHAUST FANS

 

5. Responsibilities

5.1 Project Manager

To make sure that all preparation and application works square measure disbursed in line with

that contact specifications, technique statement, shopper Engineering Specification

and manufacturer knowledge sheet.

To make sure that the progressing of labor is disbursed in line with the planned

program and as per the approved technique Statement

To make sure that all the hands, instrumentation and materials needed to execute the

Work square measure on the market.

To make sure that all connected quality procedures square measure practiced and enforced.

To make sure that all safety matters associated with this procedure square measure being ascertained.

5.2 construction site Engineer

Coordinate all the location activities in accordance with approved International Finance Corporation & look drawings,

project specification and approved technique statement and shopper Engineering

Standards.

To give all necessary info and distribute responsibilities to his team.

To monitor the progress of labor in relation with work program and to report back to

the PM.

To make sure that the installer is well trained for this kind of labor.

To coordinate with safety officer and to confirm that the works square measure disbursed in safe

practicing technique.

Site engineer shall inform mechanical internal control Inspector for internal review

to check work has been done accordance to International Finance Corporation & look Drawings, Client

Standards before getting ready internal RFI for review and also the time schedule.

 

 

5.3 QC Supervisor

Guide the QC Inspectors and monitor their performance at the location

Provide his subordinates with latest approved procedures, material submittals and look

Drawings.

Shall maintain correct filing for reports, RFI and NCRs

Maintain records of internal control check sheets/ reports for web site tests and inspections.

Coordinate with SAPMT representative the desired witnessing of review and tests.

Carry out police work thus on make sure that personal square measure operating in accordance with

approved technique statement.

Assurances of approved strategies square measure getting used for testing and material recipient

inspection.

Verification of fabric approval and trafficker clarification.

5.4 The QC Inspector

To guarantee full compliance of the work with the connected approved technique statement

Responsible to confirm that the right, approved sizes, dimensions.

Ensure that International Finance Corporation drawings, look drawings displayed on web site throughout installation

inspection.

Ensure that the materials being delivered to web site and used square measure in accordance with

the project specifications and approved material submittal and material receiving RFI.

Shall be accountable for the review, preparation of RFI all documents and

compiling them for the inclusion within the final documentation prepackaged.

To maintain comprehensive review and check records for the aim of

reference and documentation.

Ensure arrangement and site of latest discharged for construction drawings, and

specifications.

 

Ensure that tools/ instrumentation used for testing and commission purpose is graduated

and certificates on the market. (Certificate of standardisation tool are provided throughout

inspection time separately).

5.5 the protection Manager / Inspector

Ensure that the work is performed below the protection measures of the approved HSE set up

Prior to the commencement of any activities, manpower can receive Tool Box on the

project safety demand .This tool box speak can embrace each activity problems likewise

as general safety needs.

To maintain continuous inspections of the location activities, advise and train the

Involved personnel on day after day to forestall accidents, personal injury or

Property harm.

5.6 the location Supervisor/Foreman

Shall have the data of installation of Exhaust fans so as to elucidate the tactic

statement to his subordinates.

To make sure that work is disbursed properly and in line with manufacturer

recommendations and directions received from the location engineer

To make sure that tools, labor and materials square measure on the market

6. Safety

Prior to the commencement of any activities the manpower can receive Tool box speak

on the project safety needs. This tools box speak can embrace each activity problems

as well as general safety needs

Direct supervisor can make sure that Protection Equipment’s, PPE, square measure employed by web site

personnel in the slightest degree times throughout this activity

Ensures that every one system needed for review access is in situ and properly

Tagged

 

No personnel acting on prime standing on the system platform landing whereas

pushing the system from the situation to a different

Coordinate absolutely with the protection officer so as to take care of safe operating

Condition and correct work of the location.

All instrumentation and accessories are certified for his or her capability and integrity.

Safety and risk assessment shall be performed for each job or task, that has the

potential for hurt.

All personal square measure issued with personal protection instrumentation.

All electrical connections shall be automatically and electrically sound.

7. Procedures:

1. All fans shall be put in in accordance with SMACNA customary or equivalent.

2. The motor and its parts shall be freed from any scrap or alternative materials which is able to impede the

rotation of the pulleys.

3. The motor ANd its parts shall be put in in an accessible manner to produce method for

maintenance.

4. All fans shall be put in thus to extract the air respecting the air flow as laid out in the approved

IFC drawings.

5. the situation of the fans shall be as laid out in the approved International Finance Corporation drawings.

6. The fans shall be put in hanging as laid out in the approved International Finance Corporation drawings.

7. Fans connected to duct ought to be supplied with versatile connection to eliminate transit vibration to

the system.

8. Install electrical and management wiring in accordance with unit wiring diagrams, necrotizing enterocolitis and native

standards.